Use the N2790A 100-MHz high-voltage differential probe to make safe and accurate floating measurements with an oscilloscope. The N2790A probe allows conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements of up to 1,400 V of differential voltage and 1,000 V of common mode voltage. The probe can accurately measure up to 3.5 nsec of fast transient edges in modern switching power supplies.
The probe is compatible with Keysight’s AutoProbe interface with 1 Mohm input where the probe’s power is supplied by the Keysight oscilloscope’s probe interface.



Features:

• User-selectable attenuation settings of 50:1 or 500:1
• Rated to measure differential voltage up to 1,400 VDC + peak AC with high CMRR of >50 dB at 1 MHz.
• Overrange indicator which alerts the user when the probe input exceeds the dynamic range of the probe
• AutoProbe interface

• Keysight InfiniiVision 3000 X-Series, 4000 X-Series
• Keysight InfiniiVision 5000, 6000 (except for 100 MHz) and 7000 Series with software version 5.26.0001 or higher
• Keysight Infiniium S-Series
• Keysight Infiniium V-Series, Z-Series, 90000 X-Series, and 90000 Q-Series with N5449A adapter
• Keysight Infiniium 8000 and 54830 Series with software version 5.7
• Keysight 9000 Series with software version 2.0

Supplied with:

• 2x browser tips (black and red)
• 2x alligator plunger clips (black and red)
• 2x pincer clips (black and red)
• 2x 4 colored ID tags
• DC offset adjustment tool
• Manual